Category: Life Hacks

  • Speed Queen Washer Transmission Problems: Troubleshoot like a Pro.

    Speed queen washer transmission problems can cause issues such as leaking water, loud noises, and failure to spin. These problems require proper diagnosis and repair to prevent further damage.

    Speed queen washers are known for their durability and long-lasting performance. However, like any other appliance, they can experience problems over time. One of the most common issues with speed queen washers is transmission problems. Transmission problems can cause a range of issues, including leaks, loud noises during operation, and failure to spin.

    These problems can be frustrating for homeowners, but fortunately, they can often be repaired with proper diagnosis and professional repair services. In this article, we will explore some of the most common speed queen washer transmission problems, their causes, and possible solutions.

    Speed Queen Washer Transmission Problems: Troubleshoot like a Pro.

    Credit: www.amazon.com

    Understanding The Transmission System Of Speed Queen Washer

    The speed queen washer transmission system plays a vital role in washing clothes. It works by using a combination of gears, pulleys, belts, and springs to co-ordinate the agitator’s movement. The common components of a transmission system in washing machines include a motor, gearbox, clutch, and coupler.

    However, the transmission can develop problems over time. Some of the signs to look out for include difficulty in spinning, strange noises, and leaks. To diagnose transmission problems in a speed queen washer, you need to remove the outer casing and inspect the transmission system’s components.

    If you’re not sure what the problem is, it’s best to contact a washing machine repair professional.

    Common Speed Queen Washer Transmission Problems

    Speed queen washing machines are well-known for their sturdiness and reliability, but they are not without their transmission problems. One of the most typical issues, for instance, is transmission fluid leakage, which can cause serious harm to the washer motor if left unchecked.

    Additionally, another commonly encountered problem is with the agitator shaft, which can break and cause the agitator to stop working. The motor coupler can also cause problems, as it can fail over time. Worn-out transmission gears and malfunctioning transmission bearings are two more potential issues to be aware of.

    Overall, regular maintenance of your speed queen washing machine can go a long way toward avoiding these issues and ensuring your machine has a long life.

    Causes Of Transmission Problems In Speed Queen Washer

    Speed queen washer transmission problems can occur due to various reasons, including overloading the washing machine. Excessive use of the washer can also cause transmission issues. Neglecting to maintain the speed queen washer by properly cleaning it can affect its transmission performance.

    Moreover, using the wrong type or quantity of detergent can affect the functionality of the transmission. Lastly, poor installation and wiring of the washing machine can cause the transmission to malfunction. To avoid transmission problems, it is important to follow the manufacturer’s instructions for use and maintenance.

    Regular cleaning and maintenance can help ensure the longevity of your speed queen washer’s transmission.

    Solutions To Speed Queen Washer Transmission Problems

    Speed queen washers are durable and effective for cleaning laundry, but like any machine, they can encounter problems with the transmission system. There are a variety of solutions to these issues, including replacing the transmission system itself, repairing or replacing transmission gears and bearings, tackling motor coupler and agitator shaft issues, and practicing regular maintenance and cleaning.

    It’s also important to ensure proper installation and wiring of the washing machine to avoid any potential transmission problems in the future. By following these guidelines and taking proactive measures, you can easily address and prevent speed queen washer transmission problems, keeping your laundry clean and fresh with ease.

    Preventive Measures For Avoiding Speed Queen Washer Transmission Problems

    To avoid speed queen washer transmission problems, it’s crucial to take preventative measures. Overloading the washing machine must be avoided at all times, and only the recommended amount and type of detergent should be used. You must also regularly clean and maintain the speed queen washer to prevent any issues from occurring.

    Proper installation and wiring of the machine is also recommended to avoid any electrical problems. Excessive use of the washing machine should also be prevented to prolong its lifespan. By following these recommendations, you should be able to prevent any potential transmission problems and increase the longevity of your speed queen washer.

    Frequently Asked Questions For Speed Queen Washer Transmission Problems

    What Are Some Common Speed Queen Washer Transmission Problems?

    The most common problems include harsh shifting, loud noises during spin, and leaks.

    How Can I Tell If My Speed Queen Washer Has A Transmission Problem?

    If you notice any of the following signs – excessive noise, oil on the floor, or vibration – your washing machine may have transmission problems.

    Can Speed Queen Washer Transmission Problems Be Fixed?

    Yes, but it’s best to hire a professional to fix your washer. Typical repairs for a transmission problem include replacing the entire transmission or just specific parts, like the clutch.

    Is It Worth Repairing A Speed Queen Washer With Transmission Problems?

    Most owners find that repairing a speed queen with transmission problems is worth it. The machines are built to last and often have many years left once the issue is resolved.

    Conclusion

    With the speed queen washer transmission problems, it is essential to ensure that regular maintenance checks are carried out. If you notice any of the warning signs, such as leaks, strange noises or reduced performance, it is important to address the issue promptly.

    Neglecting these problems could lead to more severe damage to the transmission and, in turn, a costly repair bill. Seeking the help of a qualified technician is recommended to avoid further complications. Additionally, choosing high-quality parts for replacement can also contribute to prolonging the life of the transmission and easing the burden that these issues can cause.

    Overall, it is crucial to understand the importance of maintaining your speed queen washer and being proactive in identifying and addressing any problems that may arise. By doing so, you can enjoy the reliable performance that this washing machine is known for.

  • Speed Queen Top Load Washer Won’t Spin? Here’s the Fix!

    The speed queen top load washer not spinning is caused by faulty lid switch or lid lock switch. First, check if the lid switch or lid lock switch is functional, then troubleshoot other parts, such as the timer or motor, that could be causing the problem.

    Speed queen is a well-respected brand in the world of laundry equipment, and their top load washers are known for their durability and reliability. However, like all appliances, they can experience occasional issues that can interrupt the cleaning process. One of the most common problems is when the washer won’t spin.

    This can be caused by a variety of issues, including a faulty lid switch or timer, a worn motor coupling, or a malfunctioning belt or pulley. In this article, we will explore some of the common causes of a speed queen top load washer not spinning and provide some troubleshooting tips to help you get your laundry back on track.

    Speed Queen Top Load Washer Won't Spin? Here's the Fix!

    Credit: reviewed.usatoday.com

    Reasons For Speed Queen Top Load Washer Not Spinning

    A speed queen top load washer that won’t spin can be caused by several malfunctions. Load unbalance happens when you overload the washing machine with too many clothes. The lid switch may not work properly when it’s broken or worn out, causing the washer to stop spinning.

    A worn-out drive belt can also impede the spinning process. The door lock assembly can also be a problem if it’s damaged or not working correctly. Finally, motor coupling damages can also cause the washer not to spin. If you encounter any of these problems, contact a professional repairman to fix the issue properly.

    How To Diagnose The Problem In Speed Queen Top Load Washer

    Start by checking the lid switch assembly. This may be a cause for the speed queen top load washer not spinning. If the switch doesn’t work, the machine won’t spin. Inspect the drive belt for wear and tear next. If it’s stretched out or broken, it won’t spin.

    The door lock mechanism could also be causing the problem; examine it closely. When it fails, the washer won’t spin. Another issue could lie in the motor coupling, check for any damages. Lastly, check the drain pump for any blockage.

    A blockage could be causing the washer to malfunction as well. By following these steps, you can diagnose the problem with your speed queen top load washer and hopefully fix it without spending a fortune.

    Diy Fixes For Speed Queen Top Load Washer Not Spinning

    If your speed queen top load washer isn’t spinning, there are diy fixes you can try. First, reset the washer or check the circuit connection. If that doesn’t work, check the lid switch assembly for faults. You may need to replace the drive belt by opening the washer panel.

    Another possible issue is a faulty door lock mechanism that needs fixing. Lastly, if the motor coupling is damaged, it will need to be replaced. By following these steps, you can save money on repair costs and have your speed queen washer working properly again.

    Remember to always unplug the washer before attempting any diy fixes and use caution when working with electricity or moving parts.

    Professional Help In Fixing Speed Queen Top Load Washer Not Spinning

    If you’re dealing with a speed queen top load washer that won’t spin, professional help is your best bet. You should consider calling an authorized technician to troubleshoot and fix the issue. The problem could be with the motor coupling, lid switch assembly, or door lock assembly.

    In some cases, belt and pulley replacements may also be necessary. Always rely on an expert’s opinion when it comes to resolving problems with your speed queen washer. Don’t risk further damage by attempting to fix the issue yourself. Contact a professional technician for assistance as soon as possible.

    Preventive Measures To Avoid The Spin Issue With Speed Queen Top Load Washer

    To prevent speed queen top load washer from not spinning, try several preventive measures. Distribute the clothing load evenly within the washer basket. Conduct regular inspections to ensure the washer’s proper maintenance, and avoid overloading it. Using quality detergents and softeners and following instructions can also help prevent this issue.

    Ensure that the washer is not overloaded to allow the clothes enough space to move freely within the basket. Proper balancing of the clothes will help distribute the weight evenly, preventing the motor from overheating and breaking down. Conducting regular maintenance checks helps identify issues early, ensuring they get fixed before they escalate.

    Get into the habit of following these guidelines to prevent any spin issues with your speed queen top load washer.

    Frequently Asked Questions On Speed Queen Top Load Washer Won’T Spin

    Why Is My Speed Queen Washer Not Spinning?

    The washer might not spin due to issues such as a broken lid switch, belt, or motor coupling.

    How Do I Fix A Speed Queen Washer That Won’T Spin?

    Check and replace the lid switch, belt, or motor coupling if faulty. Contact a technician if unsure.

    What Should I Do If My Washer Motor Is Faulty?

    If motor failure is the problem, get it replaced by a certified technician. Attempting diy repairs may worsen the situation.

    Can I Prevent My Speed Queen Washer From Not Spinning Again?

    Yes, you can prevent your speed queen washer from not spinning by regular maintenance and inspection.

    Conclusion

    After reading through this guide, we hope you now have a better understanding of why your speed queen top load washer won’t spin and how to fix it. From checking the lid switch to examining the drive belt, there are several possible reasons for this issue.

    It’s important to take troubleshooting steps to help pinpoint the exact cause of the problem. Remember to always unplug your washer before attempting any repairs, and to never hesitate to seek professional assistance if needed. With these tips in mind, you’ll be able to get your washer back up and running in no time.

    Don’t let a non-spinning washer interrupt your daily routine – tackle the issue head-on and enjoy the peace of mind that comes with a fully functional appliance.

  • Speed Queen Dryer Belt Replacement: A Step-by-Step Guide.

    To replace a speed queen dryer belt, first, unplug the dryer and remove the front panel. Then, release the belt tensioner, slip the belt off the idler pulley and motor, and replace with the new belt.

    If you’re having issues with your speed queen dryer, it’s likely due to a broken or worn-out belt causing it to stop spinning. Luckily, replacing the belt is a fairly easy diy project that can be done with just a few basic tools.

    Before starting, make sure to unplug the dryer and read the manual for specific instructions on your model. In this article, we’ll guide you step-by-step through the process of replacing a speed queen dryer belt and have your dryer spinning like new again in no time.

    Speed Queen Dryer Belt Replacement: A Step-by-Step Guide.

    Credit: www.goodhousekeeping.com

    Signs That Your Speed Queen Dryer Belt Needs Replacement

    If you notice unusual noises coming from your speed queen dryer, it could be a sign that the belt needs replacing. Clothes taking longer to dry than usual could also indicate a problem with the belt. Burning smells emanating from the dryer are another red flag.

    Take a close look at the belt to check for visible signs of wear and tear. If you notice that the drum is turning irregularly or not at all, it’s time to replace the belt. Don’t wait until your dryer stops working completely to address these issues.

    By being proactive and replacing the belt, you can improve your dryer’s performance and avoid costly repairs down the line.

    Tools Required For Replacing A Speed Queen Dryer Belt

    Replacing a broken dryer belt is a task that can be done at home with ease. To accomplish your task, the following tools are required: a screwdriver, pliers, socket set, and a replacement speed queen dryer belt. In order to replace the old belt, first unplug the dryer and remove the front panel.

    Proceed to remove the old belt and replace it with the new one. Attach the front panel again and plug back in the dryer. Ensure that the new belt is properly in place before starting the machine again. Now you’re ready to dry your laundry efficiently and effectively.

    Steps To Replacing A Speed Queen Dryer Belt

    Replacing a speed queen dryer belt can be a daunting task but following these steps can help. Firstly, unplug the dryer. Next, remove the dryer’s top panel and loosen the front panel. Carefully remove the drum ensuring not to damage the dryer rollers.

    Place the new belt on the drum and then install the drum back into the dryer. Reinstall the front panel and tighten any screws. Finally, put back the top panel and plug in the dryer. With these steps, your speed queen dryer belt will be successfully replaced.

    Speed Queen Dryer Belt Replacement Tips And Tricks

    Replacing the dryer belt in your speed queen dryer can be simple when following these tips and tricks. After installing the new belt, lubricate it to ensure smooth operation and adjust the tension for proper function. Be sure to inspect the drum rollers and clean the lint trap and exhaust vent to prevent future issues.

    Regular maintenance can extend the life of your dryer and keep it running efficiently. Keep these tips in mind for a successful speed queen dryer belt replacement.

    Frequently Asked Questions On Speed Queen Dryer Belt Replacement

    How Often Should The Dryer Belt Be Replaced?

    The dryer belt should be replaced every 5-7 years or when it shows signs of wear and tear.

    What Are The Signs Of A Worn-Out Dryer Belt?

    The signs of a worn-out dryer belt include squeaking or thumping noises, clothes taking longer to dry, and the drum not spinning.

    Can I Replace The Dryer Belt Myself?

    Yes, you can replace the dryer belt yourself. Make sure to unplug the dryer and use a repair manual or video tutorial for guidance.

    What Tools Do I Need For A Dryer Belt Replacement?

    You will need a screwdriver, a putty knife or paint scraper, a new dryer belt, and possibly pliers or a socket wrench, depending on your dryer model.

    Conclusion

    Replacing the belt on the speed queen dryer is a task that may seem daunting but is undoubtedly doable following this guide. With the right procedure and tools, the process is pretty simple and can save you from buying a new dryer.

    Speed queen dryers are well-known for their durability, but over time, wear and tear is inevitable. Spotting signs of wear and tear early and replacing the belt can prolong the life of your dryer and ensure it runs smoothly. By following the tips outlined in this post, you’ll be able to replace your speed queen dryer belt confidently and get your dryer back to excellent working order.

    Don’t hesitate to call a professional if the process feels overwhelming. Proper maintenance of your appliances is essential in ensuring their longevity and effective performance.

  • Can You Sandblast Cast Iron? Exploring the Best Methods.

    Yes, cast iron can be sandblasted. Cast iron is a durable material that can withstand sandblasting, making it an effective method to remove rust, paint, and other surface coatings.

    Sandblasting involves propelling abrasive materials at a high velocity onto the surface to be cleaned. It is commonly used to prepare surfaces for painting or refinishing. Cast iron can be found in various objects such as cookware, machine parts, and outdoor furniture.

    It is important to employ safety measures when sandblasting cast iron, such as wearing protective gear and ensuring proper ventilation to avoid inhaling the abrasive particles. Overall, sandblasting is an efficient and effective way to clean and restore cast iron objects.

    Can You Sandblast Cast Iron? Exploring the Best Methods.

    Credit: www.ebay.com

    Can You Sandblast Cast Iron: Understanding The Basics

    Sandblasting is a technique that used to smooth or clean surfaces by propelling abrasive materials onto them at high speeds. It can be an effective way to remove rust or paint from cast iron surfaces. Before you begin sandblasting, there are several key points to understand.

    The Science Behind Sandblasting

    Sandblasting works by using abrasive materials, such as sand or powdered metal, to remove unwanted layers from the surface of cast iron. The abrasive particles hit the surface at high speeds, creating a cleaning or smoothing effect. When done correctly, this process can restore cast iron to like-new condition.

    How Sandblasting Works On Cast Iron

    Sandblasting cast iron can be challenging, depending on the surface’s condition.

    • Sandblasting can remove rust and paint from cast iron surfaces.
    • It can also clean up oil or grease stains.
    • You can use sandblasting to restore a cast iron surface if it has become chipped or worn over time.

    Preparatory Measures Before Sandblasting Cast Iron

    Before you start sandblasting cast iron surfaces, you need to take specific preparatory steps.

    • Inspecting the cast iron surface for damage or cracks that may affect the sandblasting viability.
    • Protecting the surrounding area by covering or masking any places you don’t want sandblasted.
    • Selecting the right abrasives to avoid damage to the cast iron surface.

    Determining If Cast Iron Is Suitable For Sandblasting

    Sandblasting cast iron surfaces may not be suitable in all cases, such as cold cast iron or those with a particularly delicate finish. Therefore, it’s essential to determine if the cast iron is suitable for sandblasting before you begin.

    • Test the cast iron surface with a small sandblasting sample to see how it reacts.
    • Check for any vulnerable areas, such as welds or joints, that may be prone to damage during sandblasting.

    Sandblasting is an effective technique to remove rust or paint from cast iron surfaces. But it’s essential to follow the necessary preparatory steps and determine if it’s the right solution for your cast iron product. With proper attention, sandblasting can restore your cast iron surfaces to their original state.

    Equipment And Materials Needed For Sandblasting Cast Iron

    Sandblasting cast iron is a popular technique used in the restoration of antique machinery, cast iron railings, and even outdoor furniture. But it’s important to have the right equipment and materials to ensure the best results. In this post, we’ll discuss the equipment and materials needed for sandblasting cast iron.

    Overview Of Equipment Used For Sandblasting Cast Iron

    Sandblasting cast iron is a process that involves using compressed air and an abrasive material to remove rust, paint, and other surface contaminants.

    • A sandblasting cabinet: This is a sealed container that allows you to blast the cast iron while containing the dust and debris.
    • A sandblasting gun: This is used to direct the abrasive material onto the cast iron surface.
    • A compressor: This is necessary to provide the compressed air needed for the sandblasting process.
    • Protective gear: This includes gloves, safety glasses, and a respirator mask to protect against the dust and debris.

    Types Of Abrasive Media For Sandblasting Cast Iron

    The abrasive media used for sandblasting cast iron can vary depending on the particular project and desired outcome.

    • Aluminum oxide: This is a common all-purpose abrasive that is used for general sandblasting projects.
    • Glass beads: These are often used for delicate sandblasting projects, as they are less abrasive than other types of media.
    • Silicon carbide: This is a very hard abrasive that is often used for removing stubborn rust and other tough surface contaminants.
    • Steel shot: This is a type of metal abrasive that is often used for cleaning and preparing cast iron surfaces.

    Importance Of Choosing The Right Abrasive Media

    Choosing the right abrasive media is crucial for achieving the desired result when sandblasting cast iron. Each type of media has its own unique properties, such as hardness and abrasiveness, that can have a significant impact on the effectiveness of the sandblasting process.

    For example, using a softer media like glass beads may be more appropriate for delicate surfaces, while a harder media like silicon carbide may be needed to remove stubborn rust and corrosion. It’s important to choose the right abrasive media for the specific project to ensure the best results.

    Other Necessary Materials For Sandblasting Cast Iron

    In addition to the equipment and abrasive media, there are a few other materials that are necessary for sandblasting cast iron.

    • Blast media recovery system: This is used to recover and recycle the abrasive media that is used during the sandblasting process.
    • Tape or plastic sheeting: This is used to cover any parts of the cast iron that should not be sandblasted.
    • Surface cleaner: This is used to clean the cast iron surface before and after sandblasting to ensure the best results.

    By having the right equipment and materials, you can achieve the best results when sandblasting cast iron. Remember to always take the necessary safety precautions to protect yourself during the sandblasting process.

    Techniques For Sandblasting Cast Iron

    Sandblasting is an excellent method for restoring and refurbishing cast iron surfaces. The process involves firing abrasive particles at a high velocity onto the surface of the cast iron to remove dirt, rust, or paint. Since cast iron is prone to corrosion, sandblasting can ensure it retains its strength and durability.

    We will discuss various sandblasting techniques and tips that can help you achieve an even finish for your cast iron surface.

    Different Techniques For Sandblasting Cast Iron

    Sandblasting techniques vary depending on factors such as the size of the cast iron, its condition, and the desired finish. Below are different techniques for sandblasting cast iron.

    • Pressure blasting: This method involves blasting abrasive particles using a high-pressure air or water jet. The pressure of the jet is adjusted to suit the size and condition of the cast iron surface.
    • Suction blasting: This method involves using a vacuum to suck abrasive particles out of the gun and onto the cast iron surface. It is a faster method compared to pressure blasting.
    • Wet blasting: This method involves adding water to the abrasive particles during blasting. It reduces the amount of dust produced and prevents warping of the cast iron surface.
    • Abrasive blasting: This method involves using various abrasive materials such as sand, glass, and walnut shells. The abrasive material used depends on the condition of the cast iron and the desired finish.

    Considerations For Using Different Techniques

    When choosing a sandblasting technique, there are various factors to consider.

    • The size of the cast iron surface: Some techniques are more suitable for smaller surfaces, while others work better for large surfaces.
    • The condition of the cast iron surface: If the surface is severely corroded, a more abrasive technique might be required. However, if the surface is in good condition, a less abrasive technique may be suitable.
    • Desired finish: The technique used can affect the final appearance of the cast iron surface. Certain techniques can leave a smoother finish, while others can create a rougher texture.

    Tips For Achieving Even Coverage When Sandblasting Cast Iron

    To achieve an even coverage when sandblasting cast iron, follow these tips:

    • Start with the right equipment: Use the appropriate nozzle size and abrasive media. This ensures that the sandblasting process is efficient and effective.
    • Avoid over-blasting: Over-blasting can create uneven surfaces and weaken the cast iron. Be sure to monitor the blasting process closely and adjust accordingly.
    • Use proper technique: Hold the sandblaster at a constant distance from the cast iron surface to ensure even coverage. Move the sandblaster in a consistent, back-and-forth motion for the best results.
    • Clean the surface thoroughly: After sandblasting, be sure to clean the cast iron surface thoroughly to remove any remaining debris or dust. This will prevent any further corrosion or damage to the cast iron.

    Sandblasting is a great way to restore and refurbish cast iron surfaces. By following the right sandblasting techniques and tips, you can achieve an even coat and a smooth finish for your cast iron surface. Remember to choose the right equipment, monitor the process closely, and clean the surface properly after sandblasting.

    With these tips, you can keep your cast iron surface looking great for years to come.

    Safety Precautions For Sandblasting Cast Iron

    Importance Of Safety Measures When Sandblasting Cast Iron

    Sandblasting is an effective technique to remove paint, rust, and other contaminants from cast iron. While it offers remarkable results, it can also pose hazardous risks if safety precautions are not followed. Safety is paramount when sandblasting cast iron.

    • Sandblasting generates airborne dust particles that can affect your breathing and eyesight.
    • Sandblasting can also cause skin irritation and severe burns if the contact is prolonged.
    • The blasting process creates a high noise level, which can cause hearing impairment if you don’t wear proper protective gear.
    • The use of solvents and chemicals in sandblasting can cause severe allergic reactions if they come in contact with your skin or enter your respiratory system

    Common Safety Hazards Associated With Sandblasting Cast Iron

    Sandblasting cast iron involves high pressure and abrasive particles. As such, it poses many risks if safety precautions are not taken.

    • Breathing in dust particles that can lead to respiratory diseases.
    • Skin contact with abrasive particles can lead to skin burns and irritation.
    • Contact with solvents and chemicals used in sandblasting can cause severe allergic reactions.
    • Being hit by flying debris from the blasting process can cause eye injury and blindness.
    • The high noise level generated by the blasting process can cause hearing loss.
    • Manual handling of heavy equipment and machines can cause musculoskeletal injuries.

    Safety Gear And Equipment Required For Sandblasting Cast Iron

    To ensure your safety while sandblasting cast iron, there are specific gear and equipment you must have.

    • A respirator or dust mask to prevent inhalation of dust particles.
    • Protective eyewear to shield against flying debris and dust.
    • Heavy-duty gloves to protect your hands from abrasives and chemicals.
    • Hearing protective gear such as earplugs or earmuffs to protect your hearing.

    In addition to the protective gear, there are specific types of equipment and tools you must use to ensure your safety.

    • Air compressor: This provides compressed air that powers the sandblasting process.
    • Blast nozzle: This is the equipment that directs the abrasive particles to the cast iron surface.
    • Blast pot: This stores the abrasive particles and the compressed air used in the process.
    • Blast helmet: This protects your head, face, and neck from flying debris.

    Sandblasting cast iron can be an effective way to remove surface impurities, but it can also pose risks to your health and safety if proper precautions are not followed. Always ensure that you have the necessary protective gear and equipment, and never compromise your safety while sandblasting cast iron.

    Frequently Asked Questions For Can You Sandblast Cast Iron

    Can Cast Iron Be Sandblasted?

    Yes, cast iron can be sandblasted. Sandblasting is a common method used to clean and restore cast iron surfaces. It involves propelling abrasive particles at high speed to remove coatings, rust, and other contaminants from the surface.

    Is Sandblasting Safe For Cast Iron?

    Yes, sandblasting is safe for cast iron. It is an effective and efficient method to clean and prepare cast iron surfaces for the application of a new finish or coating. However, it is essential to choose the right type of abrasive material and to use protective equipment and gear.

    What Type Of Abrasive Is Used For Sandblasting Cast Iron?

    The abrasive material used for sandblasting cast iron depends on the requirements of the job and the condition of the surface. Commonly used abrasives include aluminum oxide, garnet, glass beads, and steel shot. Each material has its unique properties and benefits.

    Can Sandblasting Damage Cast Iron?

    Yes, sandblasting can potentially damage cast iron if it is not done correctly. The abrasive material used, the pressure and flow rate of the equipment, and the angle and distance of the nozzle must be carefully selected and controlled to ensure that the cast iron surface is not etched, pitted, or warped.

    Can Amateurs Sandblast Cast Iron?

    Yes, amateurs can sandblast cast iron, but it is essential to have the right equipment, experience, and safety precautions. Sandblasting can be dangerous if not done correctly and can cause injury, illness, or damage to property. It is advisable to seek professional help if unsure.

    Conclusion

    After going through the entire discussion in the blog post, it is clear that sandblasting is a popular and effective way to clean cast iron surfaces. It removes unwanted substances and allows the cast iron to maintain its strength, durability, and aesthetic appeal.

    Sandblasting also helps in preparing the surface for further coatings or any kind of repairs. However, it is important to take appropriate measures and precautions during the sandblasting process and to use proper equipment and safety gears, as it can be harmful to both the operator and the environment.

    Sandblasting cast iron is a feasible and efficient technique, but it requires careful handling and professional supervision to achieve the desired results without causing any harm.

  • How to Remove Bad Smell from The Room

    Bad smells in your home can come from a variety of sources. Maybe you have pets, or someone in your household smokes cigarettes. Whatever the source of the bad smell, there are some easy ways to remove it and freshen up your home.

    We found a very interesting fact that humans can discriminate more than 1 trillion presence of odorant molecules. In this article, we will learn to remove bad smells from the room.

    Why Does My Room Smell Bad?

    We all know the feeling of coming home to a stuffy, smelly room. Whether it’s your bedroom, bathroom, or even your kitchen, a bad smell can make your whole house feel unclean. But why does this happen?

    There are a few reasons why your room might start to smell bad. One possibility is that you simply haven’t aired out the space in a while. This is especially true in winter when we tend to keep our windows closed tight to keep out the cold air. Over time, all that stagnant air can start to stink. 

    Another common cause of foul-smelling rooms is mold or mildew. These growths love damp, dark places, so if you’ve had any leaks or flooding recently (or even just high humidity), they could be to blame. Not only do they produce an unpleasant odor, but they can also be dangerous for your health if left unchecked. 

    Finally, if you have pets, their fur and droppings can definitely add an extra stench to your home sweet home. Even if you regularly bathe and groom them, their presence will likely contribute at least somewhat to any bad smells in your house. 

    So what’s the best way to get rid of bad smells? Well, it depends on the source of the odor. If it’s simply due to a lack of ventilation, open some windows and doors and let fresh air circulate through the space.

    How to Get Rid of Bad Smell from The Room

    If you want to get rid of bad smells from the room and keep the air fresh, follow the below maintenance regularly.

    • Open the windows to let fresh air in and help dissipate the bad smell.
    • Find the source of the smell and clean it up quickly if possible.
    • If the source cannot be removed, try masking the smell with a more pleasant scent.
    • Try using an air purifier to remove any lingering bad smells from the house.

    How to Remove Bad Smell from Room Naturally

    If your room is starting to smell a little bit musty, there are some easy and natural ways to get rid of the bad odor. Here are a few tips on removing bad smells from the room naturally:

    1. Open up the windows and doors. This will allow fresh air to circulate and help get rid of any lingering bad smells. As a result, fresh air will enter the room, while the foul smell will go out. 

    2. Place bowls of vinegar or baking soda around the room. These substances are great at absorbing odors.

    3. Cut up some fresh lemons and place them around the room as well. Lemons have a refreshing scent that can help mask any unpleasant odors. 

    4. Make sure you’re regularly cleaning your floors and surfaces. If you found any objects that may cause bad smells, clean them as soon as possible. Dirt and dust can build up over time and contribute to bad smells in the home. A weekly vacuuming and mopping session is very useful to keep room air fresh.

    Related: How to Clean Velvet Couch [Expert Cleaner Guides]

    Bad Smell in Room Can’t Find

    If you’ve ever had a bad smell in your room that you just couldn’t find, then you know how frustrating it can be. Here are some tips to help you find the source of the problem so you can get rid of it for good! 

    First, check all of your trash cans and make sure they’re empty. If they’re not, the smell could be coming from there. 

    Next, take a look at your furniture. Are there any food or drink spills that have been left behind? If so, clean them up as best as you can. If the smell persists, it might be coming from your carpet or flooring. Try taking a vacuum cleaner and running it over these areas to see if that helps.

    Finally, if all else fails, try opening up all of your windows and doors to air out the room. Sometimes a simple airing out is all it takes to get rid of a bad smell!

    How to Remove Odor from Walls

    If you have ever had odor issues in your room wall, you know how difficult they can be to deal with. Not only is the smell unpleasant, but it can also be tough to get rid of. If you are dealing with an odor problem on your home wall, here are some tips on how to remove them:

    1. Start by identifying the source of the odor. This is important because it will help you determine the best way to treat the problem. 

    2. Once you know where the odor is coming from, try to clean or remove anything that may be causing it. This may include things like food or garbage that has been left behind. 

    3. In some cases, odors can be caused by mold or mildew growth on walls or other surfaces. If this is the case, you will need to treat the area with mold and mildew remover before proceeding with any other steps.

    4. Another option for removing odors from walls is to use a commercial deodorizer. These devices work by neutralizing odor molecules in the air, which can effectively eliminate even tough smells.

    My Room Smells Bad And I Don’t Know Why

    If you’re like most people, you probably spend a good amount of time in your bedroom. Whether you’re sleeping, watching TV, or just hanging out, your bedroom is likely one of your favorite places in your home. But what happens when your room starts to smell bad?

    It can be really tough to figure out why your room smells bad, and even tougher to get rid of the odor. There are a few different things that could be causing the bad smell in your room. If you have any pets, they could be the culprit.

    Pets can bring all sorts of dirt and bacteria into your home, which can lead to an unpleasant smell. Another possibility is that there’s something growing mold or mildew in your room. This is especially common in rooms with poor ventilation.

    If you think this might be the case, take a look around for any signs of mold or mildew growth. Once you’ve determined what’s causing the bad smell in your room, it’s time to start taking steps to eliminate it. If it’s due to pet dander or other allergens, make sure to vacuum and dust regularly.

    You might also want to consider investing in an air purifier for extra protection against airborne particles. For mold or mildew odors, open up windows and doors whenever possible to help improve ventilation and prevent further growth.

    Related: How to Clean Pillows without A Washing Machine

    How to Get Rid of Lingering Smells

    If you have a lingering smell in your home, there are a few things you can do to get rid of it. 

    First, try airing out the room by opening windows and doors. If the smell is coming from a piece of furniture, try putting it outside under sunlight for a day or two.

    You can also try using activated charcoal to absorb the odor. Just place it in an open container in the smelly room and let it do its job. 

    Another option is to make your own air freshener by mixing essential oils with water in a spray bottle. Simply mist the area with the mixture and enjoy the fresh scent!

    How Do You Get Rid of a Smell in a Room Quickly?

    There are a few things you can do to get rid of the smell in a room quickly. First, if the source of the smell is something that can be cleaned up, like garbage or spoiled food, then remove it and clean the area thoroughly. Second, open all the windows and doors to air out the room. 

    Third, if you have an air purifier, turn it on to help filter out any remaining odors. Finally, if the smell persists, you may need to call in a professional to help identify and remove the source of the odor.

    How Do You Deodorize a Room Naturally?

    When it comes to deodorizing a room, there are a few different options you can choose from – but why not go the natural route? There are plenty of ways to do this without having to resort to harsh chemicals, and we’re here to tell you all about them! 

    One of the easiest ways to deodorize a room is by using essential oils. Simply add a few drops of your favorite oil to a diffuser and let it do its work! Not only will this make your space smell amazing, but it can also help purify the air. If you don’t have a diffuser on hand, no worries – there are still plenty of other ways to get the job done.

    Another simple method is mixing together equal parts of water and vinegar in a spray bottle, then spritzing surfaces as needed. This is great for killing any lingering bad smells, and can also be used as an all-natural cleaning solution. 

    Another option is boiling water with citrus peels (lemon works well) or fresh herbs like rosemary or lavender. Let it simmer for a while then carefully pour it into bowls or jars and place them around the room – just be sure not to leave them unattended! This will help freshen things up quickly and naturally.

    And lastly, one of our personal favorites: opening up all the windows! This might not be an option if it’s freezing outside, but on a nice day letting some fresh air in can do wonders for getting rid of musty odors. If possible, try placing a fan near an open window so that it blows the fresh air throughout the entire space.

    Baking Soda Vs Vinegar for Odor Removal

    Whether you’re trying to get rid of cooking odors or smoke smells, vinegar and baking soda are two of the most effective natural odor eliminators. But which one is better? 

    Vinegar is an acidic substance that neutralizes alkaline odors. Baking soda is a base that does the same thing. So, technically, they both work equally well at removing odors. However, there are a few things to consider when choosing between vinegar and baking soda.

    First, baking soda is much more abrasive than vinegar. This means it can be more effective at removing tough odors, but it can also damage surfaces if not used carefully. Second, baking soda can leave behind a chalky residue if not rinsed away completely.

    On the other hand, vinegar is non-abrasive and will not damage surfaces or leave behind a residue. So, what’s the bottom line? If you’re dealing with stubborn odors that require some scrubbing power, go with baking soda.

    If you’re worried about damaging surfaces or leaving behind a residue, go with vinegar.

    Related: How to Clean Electric Stove Top and Burners with Baking Soda

    What Absorbs Bad Smells

    There are many different ways to remove bad smells from the air, but one of the most effective is absorption.

    Absorption is the process of taking in or soaking up something. When it comes to bad smells, absorption is when a material takes in and traps odor-causing molecules from the air. This can happen naturally or artificially.

    Natural Absorption

    One example of natural absorption is when you open a window and fresh air comes into your home, pushing out old, musty air. The fresh air contains oxygen which helps to break down the odor molecules, making them less potent and eventually eliminating them completely. 

    Another example of natural absorption is charcoal. Charcoal is very porous, meaning it has a lot of tiny holes throughout its surface. These holes allow it to trap odor molecules like a sponge and prevent them from being released back into the air. That’s why charcoal filters are often used in homes and businesses to help purify the air and eliminate bad odors.

    Artificial Absorption 

    Artificial absorption is also used to remove bad smells from the air. This type of absorption typically uses chemicals or other materials that bind with odor molecules and prevent them from being released back into the atmosphere. One common example is using baking soda to absorb odors in your refrigerator or freezer. You have to replace it every month.

    You can also buy commercial products that use artificial absorption principles to eliminate bad odors from your room.

    What Absorbs Bad Smells Outside

    Most people are familiar with the feeling of walking into a room and being hit with a wall of bad smell. Whether it’s a gym locker room, a teenager’s bedroom, or even your own home after cooking fish for dinner, nobody likes it. But what can you do about it?

    One option is to try to mask the smells with air fresheners or candles. However, these only provide temporary relief and often make the problem worse in the long run. The best solution is to find out what’s causing the bad smells and address the issue directly.

    There are a number of things that can cause bad smells outside your home. If you have trash cans that aren’t properly sealed, they can attract rodents and other pests which will then die inside them, causing a terrible smell. If you have pet waste in your yard that isn’t cleaned up regularly, it will also start to stink.

    And if you live near industrial plants or farms, there may be airborne contaminants that are responsible for the foul odor. The first step in solving any bad smell problem is to identify the source. Once you know where the smell is coming from, you can take steps to eliminate it.

    If it’s coming from your trash cans, make sure they have tight-fitting lids and clean them out regularly. If pet waste is the issue, pick up after your pets every day and consider using an enzyme-based cleaner to break down the organic matter and eliminate odors. And if industrial pollution is wafting into your yard, there may not be much you can do on your own – but you can contact local authorities or environmental organizations to see if they can help.

    Conclusion

    If your room smells bad, there are a few things you can do to remove the odor. First, try airing out the room by opening the windows and doors. If the smell is coming from something in the room, like dirty laundry or garbage, be sure to clean it up right away.

    You can also try using air fresheners or candles to mask the bad smell.

    Reference
    https://pubmed.ncbi.nlm.nih.gov/24653035

  • How to Fix a Large Hole in Drywall [Easy Way]

    Drywall is used widely instead of brick wall for a low cost. But, it can be damaged by a doorknob, while moving furniture, earthquakes, or accidents with any objects. Sometimes, an electrician or plumber makes holes in the drywall while repairing it.

    Statistics show that drywall is used in 96% of homes in the USA. The drywall repair business is growing rapidly. We are going to share how to fix a large hole in drywall without a professional.

    Different sizes of holes can occur in drywall. Repairing a large hole is different from fixing a small hole. While Small holes can be fixed easily by using an adhesive drywall patch or tape. A large hole needs some materials that are available in the hardware shop.

    Experts suggest cutting the damaged area and replace with a fresh piece of drywall. It is the easiest solution to fix a large hole in drywall.

    Easy Way to Fix a Large Hole in Drywall

    The method we are going to share doesn’t require any special skills. But, if you have previous experience, it will be easy to fix the broken dry wood. Fixing dry wood may take up to 3 hrs and the estimated cost is around $50. Before we go to the working procedure we need some tools and materials.

    Drywall Repair Kit for Large Holes

    Equipment We Need

    • Framing square
    • Drywall saw
    • Tape measure
    • Pencil
    • Wood saw
    • Drill with screwdriver bit
    • Utility knife
    • Drywall knife
    • 150-grit Sanding sponge
    • Towel rag
    • Paintbrush

    Materials We Need

    • Drywall Screws
    • Joint Compound
    • Plywood Strips
    • Masking Tape
    • Construction Adhesive
    • Paint

    Working Procedure:

    WARNING: Check your building diagram if there is any wiring or plumbing behind the drywall. You can also use a flashlight through the hole to check.

    Step 1: Preparing the Drywall

    Mark the line on the damaged area using a framing square and a pencil. Then use a drywall saw to cut the drywall into a square or rectangle with a straight edge. If the hole is less than 6 inches, you don’t need to follow this method. You can fix the drywall with a repair patch.

    Installing Plywood Strips
    Photo: Lowe’s Youtube

    Step 2: Installing Plywood Strips

    Measure the drywall’s hole and cut plywood into pieces. Plywood pieces should be 2 inches longer than the hole. Place the plywood back into the hole and parallel them to one of the long sides. Screw the strip through the drywall and into the plywood strip. Install other plywood strips following the same method.

    Step 3: Installing the Dry Wood Patch 

    Now, cut a piece of drywall that fits the hole. Use screws to mount it into the backing strips. Choose the right patch size with the same thickness as the existing drywall.

    Installing the Dry Wood Patch

    Step 4: Tape on The Gap

    Use drywall joint tape all around the hole to cover the seam. Tape should be lies flat and overlap the trap stips at all the corners.

    Step 5: Apply Drywall Joint Compound

    Apply drywall joint compound on the tape. Use a drywall knife to apply the joint compound. If you found any burrs or clumps, remove them using a knife. The layer of the compound should be thin.

    Apply another layer of joint compound and extend the layer than previously. Leave it until the layer is dry. Then add the 3rd layer of compound and let it dry again.

    Finally, use a sanding sponge to make the surface smooth. Don’t oversand compound that will cause mesh tape to show through. You can also use wet sand to keep down the amount of dust. Then use a dry towel rag to clean off all sanding dust.

    Apply Drywall Joint Compound

    Step 6: Paint the Drywall

    Use a paintbrush to cover the entire drywall with a coat of primer. The primer coat is strongly suggested to provide a consistent base for topcoats of paint. Leave the primer coat to dry for a day. You can apply primer coats two times to the area if required. Then match your wall color with the new paint. Sometimes, it becomes more bright than the previous painting. It is hard to match the old color 100%.

    Conclusion

    A professional drywall fixer costs $60 to $90 per hour. So it is worth giving it a try to fix your own drywall. Holes below 6 inches are easy to fix. You can use a wall repair patch to fix small drywall.

    Common Questions Answered (CQA)

    How Much Does It Cost to Fix a Large Hole in The Drywall?

    It varies on the size of the hole. It can cost up to $50.

    How to Fix Holes Below 6 Inches?

    Trim the area using a knife. Then cover the area with a repair patch. Then apply drywall joint compound and paint the area.

    You may like:
    How to Replace Shower Cartridge in 5 Steps
    How to Clean Velvet Couch [Expert Cleaner Guides]
    Best Way to Keep Ice Cream Frozen in A Cooler

    Resources we used:
    https://thepatchboysfranchise.com/research/how-big-is-the-drywall-repair-industry
    https://blog.puls.com/drywall-repair-cost

  • Best Way to Keep Ice Cream Frozen in A Cooler

    You planned camping or a day at the park with lots of ice cream in your cooler. But you saw ice cream melted when you went to eat. This happens in most of our life. You just can’t put your ice cream in your cooler to keep them frozen. Ice cream is designed to melt sooner than ice. That’s why ice cream doesn’t stay frozen in a regular cooler longer.

    However, there are a few ways to keep ice cream frozen for longer. Even on a hot day, you can prevent ice cream from melting with a cooler.

    Most people try to keep ice cream frozen in a cooler with dry ice and some try without dry ice. Our teams find a few effective ways to keep ice cream frozen for up to 1 day in a cooler. Cooler must be colder than 32 °F to keep them frozen. Let’s dig into the details.

    Keep Ice cream frozen with dry ice

    Dry ice is commonly used for temporary refrigeration. It is a solid form of carbon dioxide which is -109.3°F, colder than our home freezer. We recommend storing dry ice in a ventilated area & keep it away from children. Wear gloves before handling.

    Thing we need

    • Dry ice
    • A towel/ Newspaper
    • Cooler

    Preparing dry ice

    dry ice on hand
    image: memphisice.com

    Collect enough dry ice according to your cooler size. You need about 10-20 pounds for a regular-size ice chest. You can also make your own dry ice by using a CO2 fire extinguisher. It could be dangerous, we don’t suggest doing that.

    Covering the dry ice

    At first, wear protective gloves to avoid cold. You can use a towel or newspaper to cover the dry ice. Covering ice will protect your ice cream or other food from extreme cold power.

    frozen ice cream with dry ice into cooler
    image: wikiHow

    Placing dry ice into the cooler

    Depending on the foods you will carry on the cooler, you can put the dry ice on the top or bottom. To keep items frozen longer, put the dry ice on the top. Since cold air sinks, it works best on the top. Always try to put ice cream in the bottom and put dry ice above them.

    Filling the gap

    If there are any gaps in the cooler, use towel to fill them. Empty space will cause the dry ice to melt quickly.

    Useful tips to keep food frozen longer on a cooler

    • Close the cooler lid carefully. 
    • Avoid direct sunlight in the cooler.
    • If you carry in a car, close the windows to reduce the sun’s heat.

    Disposal of dry ice

    When you’re finished using the dry ice, just keep your cooler open in a ventilated place. Dry ice will sublimate into carbon dioxide gas. It will dissipate into the air.

    Keep ice cream frozen in a cooler without dry ice

    Dry ice is very effective to keep ice cream frozen for longer. We can do this without dry ice. We will use regular ice that can be made using a freezer. Let’s do it.

    Things we need

    • Deep freezer
    • Plastic container
    • A serrated knife
    • Warm water
    • A towel/ Newspaper
    • Cooler
    • Safety Glove
    • Few freezer bags

    Making ice with a freezer

    Take a plastic container and pour it with 4-5L water. Now, freeze warm water in a freezer for 18 to 24 hours. We have to wait until every inch of the water has frozen. When water turns into ice properly, use a serrated knife to cut the ice into cubes. Wear a glove before starting the cutting process.

    preparing ice with freezer
    image: acouplecooks.com

    Preparing Cooler

    We have to use a high-quality insulated cooler. Different types of coolers are available in the market. Insulate cooler works better than a disposable styrofoam cooler. Now cool down your cooler to reduce melting ice. Take enough time to make your cooler cool down. When the cooler is ready, follow the next steps.

    Putting ice on the cooler

    Now, pour the cooler with the ice. Keep ice cream on the bottom which needs to stay frozen. Then put a few cubes of ice above the ice cream. If you have something else, put them on the top of the cooler. Which we put in the bottom will stay cold longer.

    Keep-ice-cream-frozen-in-a-cooler-without-dry-ice
    image: wikiHow

    Using rock salt & a freezer bag

    Rock salt slows down the melting process of the ice. Use a few rock salt on the top of the rice.

    Freezer bags also helps to slow down the melting process. It adds an extra layer of insulation. If possible, keep your foods in the freezer bag, then place them in your cooler.

    Filling empty space

    Use a towel to feel the empty space of your cooler to reduce the melting. Also, avoid opening your cooler without necessary and keep it shut as much as possible. Don’t keep your cooler in direct sunlight.

    Related Articles:
    Easy Homemade Air Conditioner without Ice Using a Fan
    How to Clean Pillows without A Washing Machine
    How to Clean a Pasta Maker [Both Manual & Electric Machine]

    Common Questions Answered (CQA)

    Will ice cream stay frozen in a cooler?

    Yes, if you use dry ice in the cooler, ice cream stays frozen in the cooler.

    How long will dry ice keep ice cream frozen in a cooler?

    Ice cream will stay frozen for up to 12 hours with dry ice.

    How do you pack ice cream in a cooler?

    To reduce the ice melting, you can use freezer bags to increase the insulation.

    Where can I purchase dry ice?

    You can purchase this from a local store or online store.

    Final Words

    For a day trip, you can easily keep your ice cream frozen in a cooler with dry ice or regular ice. Always try to use a high-quality cooler instead of a cheap one.

    Resources used
    https://oehs.ecu.edu/chemical-hygiene/lab-safety/lab-safety-resource-index/dry-ice
    https://www.dryicecorp.com/many-uses-of-dry-ice/using-dry-ice-to-maintain-your-ice-cream-frozen-in-a-cooler

  • Easy Homemade Air Conditioner without Ice Using a Fan

    The summer is so much hot. Life becomes a little harder. Most of us don’t have the ability to use expensive air conditioners to beat the summer heat. But, you don’t need AC to beat the summer heat. You can easily make an air conditioner without ice using a fan and bottles.

    If you want to keep yourself & room cool from the excessive summer heat, please also read our previous article. After researching, our team finds an easy homemade solution to prevent summer heat. To make this homemade air conditioner without ice you need a fan & a few bottles only. You don’t need to buy extra ice, because we are going to make them own. We promise you, you will feel cool & more comfortable.

    Making Homemade Air Conditioner without Ice

    The science behind this method is very easy. We will be using a few frozen bottles in front of the table fan. You can also use a standing fan or something alternative. When we run the fan, the frozen bottles will make the air flow cool. Now, let’s do it.

    Thing we need

    • 4-5 water bottles
    • Deep Freezer
    • A table fan, box fan, or standing fan
    • Salt (optional)

    Working Procedure

    Preparing bottles

    Take 2-3 bottles and pour them with water. You may also use 3 tbsp of salt on each bottle. Salt helps to only freeze water if it gets cold enough. Use disposable plastic bottles and put the caps back. Now, shake it to mix properly. You can use any salt that you use in the kitchen.

    Freezing the bottles

    Put the bottles in the freezer and leave them for a few hours. We suggest you make 2 sets of bottles. While one set of bottles melts down and becomes warm, you can use pre-ready bottles to avoid waiting. Make them completely frozen and take them out while the water turns to ice.

    Set bottles in position

    Air Conditioner using fan and bottles
    image: wikiHow

    Finally, set the bottle in front of your fan. Keep 5-6 inches of distance from the fan. When you turn on the fan, the air will cool down as it passes around the bottles. To maximize the benefit follow the below:

    • Keep 2 inches gap between bottles. 
    • Keep the fan pointed to the water bottles.
    • Keep the fan & bottles in front of you and try to sit close to the fan.
    • When ice melts down, use another set of bottles.

    Conclusion

    An air conditioner is a great way to prevent summer heat. But, it is not the only way to prevent it. I hope you will feel much more comfortable during the summer.

    Related Articles:
    How to Clean Pillows without A Washing Machine
    How to Clean a Pasta Maker [Both Manual & Electric Machine]
    How to Keep Yourself & Room Cool from Excessive Summer Heat

    Resources we used:
    1. https://van.physics.illinois.edu/qa/listing.php?id=1598&t=freezing-saltwater

  • How to Keep Yourself & Room Cool from Excessive Summer Heat

    It is very difficult to stay cool during the summer hot. It becomes harder if you don’t have air conditioning or if you are under an excessive heat warning area. When you go out, you put on sunscreen but become dehydrated.

    It doesn’t matter if you don’t have AC to make your room cool. We are going to show different ways to cool down your room. Follow our guidelines to make your room comfortable from the excessive summer heat and keep yourself cool.

    5 Effective ways to Keep Yourself & Room Cool Excessive Summer Heat

    1. Reduce the lights in your room

    Don’t use the incandescent bulb, even LED bulbs also make your room heat. Don’t use light without necessary. Use dim light when the LED bulb is not necessary. Use daylight if possible.

    2. Using Fans smartly

    If you are using stationary fans that are also known as table fans, you can turn them into a mini room cooler. If your room is bigger and multiple people stay here, try to purchase more fans according to your requirements.

    a fan on ice to keep cool
    image: Primitive Ideas (youtube)

    You can produce more cool with the stationary fans by using ice cubes behind the fans. Take a few ice cubes and put them in the back or front. You can also use an ice bottle. It works like an air cooler.

    3. Prevent direct sunlight to reduce hot

    image: saludconlupa

    You can reduce around 30% of the heat by keeping the windows closed during the day. Also, use sun shades or curtains to block the sunlight when it is out. Open windows after sunset. 

    4. Limiting the heat-generated devices

    Most of the devices we used in our daily life generate heat. Always turn off devices that you are not using like laptops, TV, dryers, washing machine, and stove. Unplug idle devices to reduce room heat.

    5. Take a cold shower

    A cold shower helps to lower body temperature. A warm shower will produce sweat from your body. The best way to take a cold shower in the morning & night before you sleep. A night shower is helpful for better sleep.

    6. Use a dehumidifier

    A dehumidifier may reduce the humidity level in a room which makes your room cool down. If possible, purchase a dehumidifier. But, measure the humidity of your room before purchasing it. Ideal humidity in a room is between 50% to 55%.

    7. Drink enough water

    An adult person should drink at least 2800 mL of water on hot days. Try to drink at least one glass of water to keep your body hydrated. Try to use a water bottle when you are out. Avoid soft drinks or cola. Soft drinks have sugar that increases your thirst.

    Conclusion

    Spending too much time in the summer heat can cause medical emergencies. Try to Keep Yourself & Room Cool from Excessive Summer Heat. If you feel sick, try to make your body cool. To avoid any serious condition, call emergency services for help.

    Related Articles:
    How to Reset Luggage Lock without A Reset Button
    How to Clean Electric Stove Top and Burners with Baking Soda
    How to Build a Fire Pit on The Grass with Bricks, Stones & Rocks

    Resources we used:
    https://www.nydailynews.com/new-york/dangers-soda-article-1.963859

  • How to Reset Luggage Lock without A Reset Button

    A luggage lock is very useful to prevent thieves. It also prevents accidental opening while traveling by air. Most of the luggage comes with a built-in lock but some people use the external locks for extra protection. Whatever you are using, if you have forgotten the combination key, this article is for you.

    Our teams research to find a proper solution to unlock forgotten password luggage. We found that most of the luggage combinations have a factory setting of 000, and have 3 dials. There are only 1000 different possible combinations for the 3 dials. Let’s see how to reset the luggage lock.

    Reset luggage lock without a reset button

    Some luggage lock doesn’t come with a reset button. In this case, you have to repair it or try to unlock it manually. Now, let’s see how to hack the code.

    1. At first, you have to spin the wheel to find the empty space. The empty space is below the wheel. You can easily see the empty space from the outside. Find the empty space for all the wheels. After positioning all the empty space in one line, we can start the second phase.
    empty space below the luggage lock wheel
    image credit: Techscrew (youtube)
    1. Now, rotate each wheel clockwise for once. Then press the button to unlock.
    1. If it doesn’t work, rotate once more each wheel clockwise. Now, press the unlock button again. It should be open now.
    Luggage lock opened
    image credit: Techscrew (youtube)
    1. You may need more or less rotation. But, keep in mind, every time you have to rotate all the wheels.

    Unlock the built-in lock using a reset button

    If you found a reset button on your luggage lock, you can easily reset the lock. It should be beside the combination key.

    1. Use a paper clip or pen to push the small button.
    image: Vinzy Chong (youtube)
    1. Keep holding the reset button and enter a new combination key. Try to keep the combination key easy.
    2. Now, release the button. Your luggage combination key has been successfully reset.

    Reset combination padlock

    A combination padlock is an external lock for luggage. It is also used widely for luggage safety. If you have forgotten the password for your combination padlock, we are going to show you a very smart way to reset your padlock.

    reset your new combination padlock
    image: JJ마파기 (youtube)
    1. Most of the padlocks come with a factory set to 000. Open it using the factory code.
    2. Now, turn the shackle to 180 degrees from the locked position. Press the shackle down. If it doesn’t work, try to move the shackle to 90 degrees, then press it down and move it to 180 degrees.
    3. Now, set a new combination key by spinning the wheel. Use an easy combination key.
    4. Turn back the shackle to the original position. Check your padlock if it is working perfectly.

    Conclusion

    The luggage lock is easy to reset if you forgot the combination key. It is mainly used to prevent opening the luggage accidentally. In the USA, TSA suggests certain locks which they can easily open for inspection. Luggage locks can be opened by the authorities of the airports. So, always use an easy combination key to avoid the hassle.

    Related Articles:
    How to Clean Electric Stove Top and Burners with Baking Soda
    How to Build a Fire Pit on The Grass with Bricks, Stones & Rocks
    7 Remedies to Clean Concrete Patio Without A Pressure Washer

    Resources we used:
    https://en.wikipedia.org/wiki/Luggage_lock
    https://www.youtube.com/watch?v=TI4AgFhcnys